Convenient Cd Recording (Deck B Only); Cd Synchro Recording - Kenwood KXF-W4030 Instruction Manual

Convenient CD recording (Deck B only)

By connecting this unit with a KENWOOD "
CD player with a SYSTEM CONTROL jack using system control cords, recording on this unit and playback on the CD player can
be started simultaneously.
20
Since this unit is not designed for recording with metal (TYPE IV) tapes, do not use metal tapes for recording.
Preparation
1
Complete the connections referring to
"System connections".
2
Make "Playback (recording) preparation".
3
(Load a disc in the CD player.)

CD synchro recording

1
Perform auto-bias adjustment.
AUTO REVERSE AUTO REVERSE
TAPE A TAPE B
- ON – OFF
2 7 3 3 7 2
2
Adjust the recording level.
1
Play a CD.
Press the 6 key
of the CD player.
3
Set the record-pause mode.
AUTO REVERSE AUTO REVERSE
A B
TAPE TAPE
- ON – OFF
2 7 3 3 7 2
4
Start playing the CD.
Press the 6 key of the CD player.
To pause
To restart recording
To stop
", type amplifier (receiver) with a SYSTEM CONTROL jack and a KENWOOD
AUTO BIAS
2
Set the record-pause mode.
8 ¶
PAUSE REC/ARM
÷ While pressing the PAUSE (8)
key, press the REC/ARM (¶) key.
8 ¶
PAUSE REC/ARM
Press the 6 key of the CD player.
:
Press the 6 key of the CD player.
:
Press the 7 key of the CD player.
:
6
AUTO REVERSE
A
TAPE
0
2 7 3
: Keys and control used in the operations described on this
page.
÷ The optinum bias is set in about 50 seconds, after which the deck
enters stop mode.
÷For a fine adjustment after setting AUTO BIAS, refer to the description
of "Bias level adjustment".
÷ To cancel the auto-bias adjustment operation in the middle, press the
stop (7) key.
÷ Recording is possible even when the auto-bias setting is ommitted.
3
Adjust the recording balance
and recording level.
"How to record."
÷ While pressing the PAUSE (8) key, press the REC/ARM (¶) key.
÷ Synchro recording is not possible when tracks of more than one CD are
programmed using a Carrousel type CD player.
÷ Recording starts at this moment.
÷ When the CD player has completed playback, the cassette deck stops
recording and enters the stop mode.
÷ If the stop (7) key of the cassette deck is pressed, the cassette deck
enters the stop mode but the CD player does not stop.
0 0
AUTO REVERSE
B
TAPE
- ON – OFF
3 7 2
4
Put the CD player in stop
mode.
Press 7 key of the
^ CD player.
&