Kenwood X-W320 Instruction Manual page 29

Stereo cassette tape deck
Hide thumbs Also See for X-W320:
Table of Contents

Advertisement

During CD playback, any desired track can be selected and recorded with "Single-track recording".
Pressing the O.T.E. key while the CD player is in stop mode performs "All-track recording" of a CD at the same time as playing it.
This facility is called the O.T.E. (One Touch Edit) function.
Please note that the O.T.E. recording is not possible with an LD player.
Preparation
1 Make "Playback (recording) preparation".
2 (Load a disc in the CD player.)
3 Adjust the recording level.
4 Perform "Basic remote control opera-
tion" (GRC only).
CD single-track recording (O.T.E.) (Deck B only)
1
Play the CD track to be recorded.
2
Press the O.T.E. key.
RC
A
B
O.T.E.
CD all-track recording (O.T.E.) (Deck B only)
1
Select the disc.
2
Stop playing the CD.
3
Press the O.T.E. key.
RC
A
B
O.T.E.
To stop recording in the middle
RC
Cassette deck.
7
!
^
§
GRC
Select the icon and press the
ENTER key.
O.T.E.
GRC
Select the icon and press the
ENTER key.
O.T.E.
GRC
Select the icon and press the
ENTER key.
System remote control operation
Lights up.
O.T.E.
After the track has been recorded, the cassette deck stops after leaving
a non-recorded blank of 4 seconds. The CD player enters pause mode.
To record another track ... Repeat steps 1 and 2.
When a "Multi-disc CD player" is in use, select the desired disc.
Lights up.
O.T.E.
The cassette deck performs the ARM operation for about 8 seconds,
then starts recording. The CD player starts playback at the same time.
At the end of tape side A, the music is not recorded on the guide (leader)
tape section. If you want to prevent a track from being interrupted in the
middle, record the interrupted track at the beginning of tape side B
according to the instructions in "How to record".
Pressing the 7 key of the CD player (or selecting the CD player & icon
and pressing the ENTER key) stops the CD player and the cassette
deck.
Pressing the 7 key of the cassette deck (or selecting the cassette deck
& icon and pressing the ENTER key) stops the cassette deck and the
CD player.
X-W320 (En)
2 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents