Synchro Playback/Recording; Synchro Playback Of Cassette Deck - Kenwood X-W320 Instruction Manual

Synchro playback/recording

By system-connecting this unit with the AV CONTROL CENTER of KENWOOD "SERIES 21" system (optional) or a KENWOOD
CD player (optional) through a system control cord, the convenient system control operations can be used as described below.
Preparation
1 Turn this unit ON.
2 Make "Playback (recording) preparation".
3 Turn the AV CONTROL CENTER OFF. (This
unit enters standby mode in which the
STANDBY indicator lights.)

Synchro playback of cassette deck

When this unit is in standby mode, simply pressing a play key turns the system components simultaneously ON and starts tape
playback of the cassette deck.
Press the 2 or 3 key of the deck in use
To stop playback
!
2 7 3
2
7 3
: Keys and control used in the operations described on this page.
Tapes are played in the directions indicated by their respective indica-
tors on the display.
Press the 7 key of the deck in use to stop it.
X-W320 (En)
1 9