Preparation For Playback (Recording); Playback (Recording) Preparation - Kenwood X-W320 Instruction Manual

Preparation for playback (recording)

Before playback (recording)
Set the POWER switch to ON.

Playback (recording) preparation

1
Load a cassette tape in deck A or B.
1 Press the 0 button.
2 Insert a tape and close the cassette holder.
Deck A:
Playback
only.
2
Select the tape transport direction.
1 Press the 2 key or 3 key.
To play (record) tape
side B.
Feed the tape section which cannot be played
or recorded onto in the forward direction.
2 Press the 7 key.
3
Determine the playback (recording) condition.
1 Select the playback (recording) mode.
2 Select the Dolby NR mode.
POWER
- ON – OFF
0
Deck B:
Playback/
recording
available.
A B
To play (record) tape side A.
2
7 3
2 7 3
REV.
MODE
DOLBY NR
: Keys and control used in the operations described on this page.
Be sure to remove tape slack before insertion.
The type of tape, that is, the Normal or High position is selected
automatically.
This unit cannot record sound on a Metal tape.
Be sure to close the cassette holder securely by pushing it.
Normal position
High position
Tape transport direction indicators
The 2 and 3 indicators show the direction the tape is transported
during recording or playback. The direction used when the tape is
last stopped is held in memory even after this unit has been turned
OFF, and the tape transport starts in the indicated direction when
the unit is started automatically by a timer, etc. To change the tape
transport direction, press the play key for the opposite direction and
immediately press the 7 key.
Deck A direction indicators.
20 15 10
L
R
DUBB. NOR.
DOLBY NR B C
STANDBY
A B
COUNTER
Each press switches the indication.
1 "[" :Double-side playback (recording) which stops tape stops
after having played (or recorded) both sides.
2 """ :Playback is endless, but recording stops after having
recorded both sides.
3 """ :One-way playback (recording) which stops tape after
having played (or recorded) a single side.
Each press switches the indication.
1 DOLBY NR "OFF" (extinguished): Dolby NR is not used.
2 DOLBY NR "B": Noise reduction of the ordinary type.
3 DOLBY NR "C": Noise reduction with higher performance.
Select the Dolby NR mode according to the tape recording status.
X-W320 (En)
TYPE
TYPE
Deck B direction indicators.
6 3 0 3 6 (dB)
(SP) HIGH CCRS O.T.E.
0 0 0 0
1 1