Relay Recording; Timer Recording - Kenwood X-7WX Instruction Manual

Relay recording
®
@
Press the desired INPUT SELECTOR switch on the
amplifier for the source to be recorded.
Press REC key in A or B deck.
Press REC and PAUSE keys on the other deck at
the same time to pause the recording.
(Make sure the recording mode indicator on the ampli-
fier for A and B are the same.)
Adjust record level by turning the REC LEVEL control.
When DIRECTION switch is set to normal mode
(== ),when one side ends, the other deck starts recor-
ding.
When DIRECTION switch is set to reverse mode (=>),
when the reverse side ends the other deck starts recor-
ding.
Set a new tape in the deck that finished recording and
pause the recording. By doing this, continuous recor-
ding is possible.
To record the same source in both A
and B decks
KENWOOD _ steso counge auto suverse CASSETTE DECK x 7wx
(A-7X)
®
®
®
_— eo
PHONO
<8 TT ee
(TUNER }
TAPE-A REG
TAPE-B os
VIDEO Tyinec to wil
me 0
LIME FN
U— inPpuT——
ao Bao VOLUME
Confirm that the lit in-
dicator source is iden-
tical to that displayed.
Arrows ("—" and "-+")
show the moving dir-
ection of the display.
Set cassette tapes in A and B decks.
Set the input mode on amplifier to desired source.
Press REC key in A and B decks.
REC mode indicator on the amplifier flashes and recor-
ding starts. ;
Timer recording
©O04F e080
Set a cassette tape in A or B deck.
To set the TIMER see the timer instructions (T-7X/T-7 LX)
"How to set program timer".
Set the TIMER switch to REC.
Turn the POWER switch of the tuner OFF.
Recording automatically starts at the timer ON timer.
Setting cassette tapes in A and B decks operate relay REC
from A deck.
X-7WX(U) 171