Troubleshooting; Tec Case Is Beeping; Single Components Don't Work - Dedrone DroneTracker Event Kit 2.5 Installation Manual

Dedrone

8 Troubleshooting

8.1 Tec Case is beeping?

The Tec Case is equipped with a temperature sensor.
In case, the temperature inside the Tec Case gets over 149 °F (65 °C), the Tec Case begins to
beep and the Tec Case switches off.
 Cool down the inside of the Tec Case, for example by open the lid or providing shadow.
The beeping stops, when the temperature gets under 149 °F (65 °C).

8.2 Single Components don't work?

Each component is protected by a single fuse.
In case of a short circuit or an overload, the fuse could trip.
This could cause by:
•
Water
•
Damaged cable
•
Wrong connected device (max 24 W (typ) at PoE+)
 Check and change the tripped fuse.
IM-Inst-EK2536en
Charging Battery +
10 A 10 A
8 Troubleshooting
PoE+ Router
3 A 3 A
21