Table of Contents
Advertisement
4 Set Up
5
a.
Connect your sensors to the socket
the screwable patch
The sensor boots automatically and after
approximately 10 sec the blue button at the
sensor, indicating that the hardware is
ready.
The sensor boots not automatically after
approximately 10 sec?
Push the blue button at the sensor and
wait for it to illuminate.
b.
To connect your laptop by LAN, connect the
laptop to the socket
c.
To connect your laptop by Wi-Fi, connect the
laptop to the Wi-Fi Dedrone-Demo or
Dedrone-Demo-5GHz.
Password: Dedrone-Demo
Tip: For a most solid connection we
recommend the LAN connection. If a Wi-Fi
connection is needed, the 5GHz Wi-Fi is
recommended for a more solid connection.
d.
Connect the network socket to the socket
at the Event Kit. For an environmentally sealed
connection use a patch cable (not included)
with the environmentally sealed connector
(see 4.4 Cable Requirements and Preparation
(Crimp), page 14).
Start your browser.
6
For optimal use, we recommend Chrome or Firefox.
Enter the IP: 10.42.87.102 or 192.168.0.102
7
The web interface appears.
Enter your login data. The default login credentials are:
8
User: admin Password: dedrone
For further information consult chapter "First Steps" of the integrated online help
in the DT Control Center.
16
with
cable.
with a patch cable.
Dedrone
IM-Inst-EK2536en
Advertisement
Table of Contents
