Update Dronedna With The Tec Case - Dedrone DroneTracker Event Kit 2.5 Installation Manual

7 Update
Choose [Update x Sensor(s)].
6
The button is getting grey and the

sensors are getting updated in the
background. During the update, the
sensors are getting disconnected and
reconnected. Some short System
Messages show connection process.

7.2 Update DroneDNA with the Tec Case

Requirements:
□
Existing internet connection
□
Login ingredients for the DT Control Center
□
Configured Dedrone Cloud
□
Installed latest software version for the sensors
□
Additional patch cable; for a weather resistant connection, the patch cable has to be
prepared (see 4.4 Cable Requirements and Preparation (Crimp), page 14)
Procedure:
Multi Sensor destroyed by losing power supply during update!
The update process must be passed without any power interruptions. In case of power
lost during the process, the Multi Sensor gets destroyed.
•
Update the Multi Sensor only with a fully charged battery or connected battery
charger.
Set up the Event Kit (see 4.3 Set Up autonomously, page 12 or 4.5 Set Up with LAN
1
Connection, page 15) and connect to the DT Control Center.
Choose OPTIONS > DroneDNA, choose [Check for Updates] and confirm the
2
download. The download can take some time, depending on your internet
connection.
The download is complete, if the newest version is shown in menu DroneDNA

and the button [Update x Sensor(s)] appear.
Choose [Update x Sensor(s)].
3
20
Dedrone
IM-Inst-EK2536en