Dedrone
7 Update
7.1
Update a Dedrone Sensor with the Tec Case
Requirements:
□
Existing internet connection
□
Login ingredients for the DT Control Center
□
Configured Dedrone Account
□
Additional patch cable; for a weather resistant connection, the patch cable has to be
prepared (see 4.4 Cable Requirements and Preparation (Crimp), page 14)
Procedure:
Multi Sensor destroyed by losing power supply during update!
The update process must be passed without any power interruptions. In case of power
lost during the process, the Multi Sensor gets destroyed.
•
Update the Multi Sensor only with a fully charged battery or connected battery
charger.
Set up the Event Kit (see 4.3 Set Up autonomously, page 12 or 4.5 Set Up with LAN
1
Connection, page 15) and connect to the DT Control Center.
Choose menu OPTIONS > Software Version.
2
Choose [Check for Updates].
3
The window Software Update appears,
where you can download the newest
version or get the message, that your
version is up-to-date.
To start the update, choose [OK].
4
The update is starting in the background.
The window Software Update appears.
Confirm with [OK].
5
If the new software version is shown at
Current Version, the download and
software installation was successful.
The button [Update x Sensor(s)] appears.
IM-Inst-EK2536en
7 Update
19