Table of Contents
Advertisement
Dedrone
5
a.
Connect your sensors to the socket
the screwable patch cable.
The sensor boots automatically and
after approximately 10 sec the blue
button at the sensor, indicating that the
hardware is ready.
The sensor boots not automatically after
approximately 10 sec?
Push the blue button at the sensor
and wait for it to illuminate.
b.
To connect your Laptop by LAN, connect the
laptop to the socket
c.
To connect your laptop by Wi-Fi, connect
the laptop to the Wi-Fi Dedrone-Demo or
Dedrone-Demo-5GHz.
Password: Dedrone-Demo
Tip: For a most solid connection we
recommend the LAN connection. If a Wi-Fi
connection is needed, the 5GHz Wi-Fi is
recommended for a more solid connection.
Start your browser.
6
For optimal use, we recommend Chrome or Firefox.
Enter the IP: 10.42.87.102 or 192.168.0.102
7
The web interface appears.
Enter your login data. The default login credentials are:
8
User: admin Password: dedrone
For further information consult chapter "First Steps" of the integrated online help
in the DT Control Center.
IM-Inst-EK2536en
with
with a patch cable.
4 Set Up
13
Advertisement
Table of Contents
