Creating A Screen Capture And Converting It Into A Jpeg File; Setting Up The Projector Using A Web Browser - Toshiba TLP-X200U Owner's Manual

How to use the JPEG Conversion Tool (Continued)

Creating a screen capture and converting it into a JPEG file

■
This function saves the current computer screen as a JPEG file.
(1) In the Conversion Method field, select Creating screen
capture.
(2) In the File settings field, click the Browse button for File
name after conversion.
The Save As dialog box appears.
(3) In the Save As dialog box:
(a) Specify the location in which to save the converted file;
(b) Enter a file name of up to 8 characters in the File Name
field; and
(c) Click the Save button.
(4) (a) In the JPEG Conversion Tool window, click the
Conversion button.
(b) The resolution selection dialog box appears. Select
a desired resolution and click the OK button.
(c) A confirmation message appears. Click Yes.
The computer creates a screen capture, and
converts it into a JPEG file in the specified location. When
it is finished, a message appears to tell you that
"a JPEG file has been created".
Note
• The selected resolution in the dialog box will be the maximum resolution of the
converted image file. Specify the resolution in accordance with your projector's
resolution.
(1) (1)
(2) (2)
(4)-(a) (4)-(a)
(3)-(a)
(3)-(b)
(4)-(b) (4)-(b)
(4)-(c) (4)-(c)
86

Setting up the projector using a Web browser

How to use the "Projector Configuration Tool"
■
The "Projector Configuration Tool" uses the Web server features of the projector to set
up the projector using the network.
When using the "Projector Configuration Tool", set up the Network connecting the
projector and the computer.
1 See "Checking the projector status"
information on the screen and write down the IP address.
2
Invoke Internet Explorer.
Internet Explorer Ver. 6.0 or Ver. 7.0* is recommended. Enable the Javascript functions.
* Toshiba does not guarantee the operation for later versions.
3 In the address bar, enter the IP address "http://xxx.xxx.xxx.
xxx/" recorded in step
The Web browser will then display the following page.
(3)-(c)
Menu
Note: If you use a proxy server, do not enable the proxy when accessing the above IP
address.
When the wireless LAN is set to use Ad hoc mode, use the WEB browser
function in the Wireless LAN Settings Utility dialog box of Network Utility.
Note
• This function can be enabled using the WEB Browser function in the Wireless LAN
Settings Utility dialog box of Network Utility without specifying the URL into the
browser's address bar.
to display
p.60
above.
1
Projector name
Projector ID
87