Table of Contents
Advertisement
How to use the JPEG Conversion Tool (Continued)
Converting files created with Microsoft
This process provides presentations without using a computer by converting
presentation files created with Microsoft
a memory PC card, and displaying them in a slide show.
• To use this conversion mode, Microsoft
computer.
• Only static images are supported by this process. Animation and audio are not
supported.
Presentation files created with Microsoft
consist of several slides. For this reason, the tool creates a folder
with the name specified in step (5), below, and file for each slide
is created in the folder (starting with slide001.jpg).
(1) In the Conversion Method field, select Converting PPT file.
(2) In the File settings field, click on the Browse button for PPT
File Name.
The Open dialog box appears.
(3) In the Open dialog box:
(a) Specify the location of the file to be converted; and
®
(b) Select the PowerPoint
presentation file to convert,
then click on the Open button.
(4) In the JPEG Conversion Tool window, in the File
settings field, click on the Create button for New
folder name.
The Folder create dialog box appears.
(5) In the Folder create dialog box, in the Folder name of
document field, specify a folder name of 12 characters or less.
(6) In the Folder create dialog box, click on the Selection button.
The Browse Folders dialog box appears.
(7) In the Browse Folders dialog box:
(a) Specify the location in which to save the folder; and
(b) Click on the OK button.
(8) In the Folder create dialog box:
(a) Click on the Create button.
A confirmation dialog box appears;
(b) Click on the OK button.
(9) (a) In the JPEG Conversion Tool window, click on the
Conversion button.
(b) A confirmation dialog box opens. Click Yes.
The computer begins to convert the file. When it finishes,
a message appears informing you that a "JPEG file has
been created".
®
®
PowerPoint
®
®
PowerPoint
into JPEG files, storing them on
®
PowerPoint
®
must be installed on the
®
PowerPoint
®
usually
(1)
(1)
(9)-(a)
(9)-(a)
(3)-(a)
(3)-(b)
(5)
(5)
(8)-(a)
(8)-(a)
(7)-(b)
(7)-(b)
(8)-(b)
(8)-(b)
(9)-(b)
(9)-(b)
76
Making a presentation with converted JPEG files
(1) Copy the folder created by the JPEG Conversion Tool, or its contents, onto a
memory PC card or a USB memory.
(2) Use the step
list of thumbnails.
(3) Follow the instructions in step
to find the thumbnail of the first slide, Slide001.jpg, and move the orange
p.63
frame to it. (Select Slide001.jpg)
(4) Press the
appears on the screen. This starts the presentation.
(5) To continue to the next slide, click on the remote control's
the previous slide, click on the
(2)
(2)
(4)
(4)
Creating a screen capture and converting it into a JPEG file
This function saves the current computer screen as a JPEG file.
(1) In the Conversion Method field, select Creating screen
capture.
(2) In the File settings field, click on the Browse button for File
name after conversion.
The Save As dialog box appears.
(3) In the Save As dialog box:
(a) Specify the location in which to save the converted file;
(b) Enter a file name of up to 8 characters in the File Name
field; and
(c) Click on the Save button.
(6)
(6)
(4) (a) In the JPEG Conversion Tool window, click on the
Conversion button.
(b) A confirmation message appears. Click Yes.
The computer creates a screen capture, and
converts it into a JPEG file in the specified location.
(7)-(a)
When it is finished, a message appears to tell you
that a "JPEG file has been created".
Note
• The maximum resolution of JPEG files created with the JPEG Conversion Tool is 1,024 ×
768 pixels.
1
in "Playing a slide show from a thumbnail list"
2
in "Playing a slide show from a thumbnail list"
button on the remote control. An enlarged view of the first slide
button.
77
p.63
to display a
button. To go back to
(1)
(1)
(2)
(2)
(4)-(a)
(4)-(a)
(3)-(a)
(3)-(b)
(3)-(c)
(4)-(b)
(4)-(b)
Advertisement
Table of Contents
