Toshiba TLP-X200U Owner's Manual page 39

Using the Network Utility (Continued)
 How to set up with [USB memory connection]
Set up wireless LAN using a commercial USB memory device. See
USB memory devices.
1) Copying the computer settings to the projector
• Setting on the computer
Insert the USB memory device into the
1
USB terminal slot on the computer.
Click the Tool button of the
2
Network Utility to bring up the
Wireless LAN Settings Utility dialog
box. Select [USB memory connection]
and click OK.
The dialog box for [USB memory connection]
appears.
3 Select [Projector settings] and click OK,
then enter the required setting items and
click OK.
The setting information is saved to the USB memory
device.
4 Unplug the USB memory device from the computer.
To unplug the USB memory device, follow the instructions in the user's manual
supplied with the USB memory device or the computer.
• Setting on the projector
5 Turn the projector power on.
6 Switch the input to Network.
7 Insert the USB memory device into the projector.
A message appears, notifying that the projector settings have been changed.
The projector name or the projector ID (MAC address of wired LAN)
8
will be displayed in the projector's list in the Network Utility window.
for available
p.49
76
2) Modifying the computer settings using the projector settings
• Setting on the projector
1 Turn the projector power on.
Switch the input to Network.
2
3 Press the MENU button twice, then select Easy Connect (USB
memory) in Network Utility settings from the Setting display (2) menu
and press the button.
When a confirmation window appears, insert the USB memory device
4
into the projector.
Click Yes then press the button.
5
The wireless LAN settings are saved to the USB memory device. When successfully
saved, a message appears.
Unplug the USB memory device.
6
• Setting on the computer
7 Launch the Network Utility software
application.
8 Insert the USB memory device into the
computer.
9 After a confirmation message appears,
make settings.
When the setting is complete, the projector name of the connected
10
projector or the projector ID (MAC address of wired LAN) is displayed
in projector's list in the Network utility window.
Note
• This operation is allowed only when the Transmission mode is set to Ad hoc in the
projector's wireless LAN settings. Be sure to use Network Utility version 5.1.
77