Operation - Teufel BAMSTER PRO Technical Description And Operating Instructions

Activating/deactivating
• Press the -button ⑦ to switch the device
on/off.
• If the BAMSTER PRO has been switched on,
the red LED of the -button ⑦ will illumi-
nate.
It will turn off when unit shuts down.
Tip: You should always turn off your
BAMSTER PRO when it is not in use to save
battery power.
Automatic deactivation
When the BAMSTER PRO is not in opera-
tion and you do not push any button, the
BAMSTER PRO will switch off after approx.
40 minutes.
Volume
By turning the volume control ring ⑤ you can
increase or decrease the volume in 24 steps.
The current setting is shown by the LED ring
display ⑨ . After 5 seconds, the LED ring dis-
play is turned off.
The volume level of the source device
will also affect the volume of the
BAMSTER PRO.
Widening sound
With the
sound (Dynamore
red LED in the button lights up.
Call up the battery charge status
While the BAMSTER PRO is turned on, press
button ① . The LED ring display ⑨ will
the
light up and display the battery charge status.
To go back to "normal" volume display, press
button ① again, or wait 5 seconds.
the
-button ③ you can switch widening
®
) on und off. When on, the

Operation

• BAMSTER PRO 13