Installing The Reversible Slicing/Shredding Disk Or Slicing Disk - KitchenAid KJA09 Series Manual

USING THE FOOD PROCESSOR
INSTALLING THE REVERSIBLE SLICING/SHREDDING DISK OR
SLICING DISK
To slice: Turn the disk so that the
raised slicing blade is facing up�
1
To shred: Turn the disk so that the
small, raised shredding blades are
facing up�
Hold the disk by its center hub and
lower it onto the drive adapter,
aligning the mark on the center hub
of the disk to the matching mark on
2
the adapter� When properly placed,
the disk should be level with the top
of the bowl� If the disk falls to the
storage position, lift it out, turn it
90°, and lower it again�
12 | USING THE FOOD PROCESSOR
W11338648B.indb 12
The disk can be placed in two different
positions: level with the top of the bowl
for processing, and lower, inside of the
bowl for storage�
NOTE: While the disk will operate
in the storage position, it will not
perform as well� Make sure the disk is
level with the top of the bowl for best
performance�
Alignment
marks
3
Process
Storage
Install the work bowl cover, and be
sure the lid latch is pushed down to
the locked position�
4/17/2019 7:14:50 PM