Setting The Disc; Reformat; New Disc Format; Finalize - Toshiba D-VR5SU Owner's Manual

Various settings

Setting the disc

You can format, protect, or finalize a disc.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "DISC SETUP" from "SYSTEM SETUP". For
the procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 24.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
REFORMAT AS DVD VIDEO
AV SETUP
REFORMAT AS DVD VR
REC SETUP

NEW DISC FORMAT

FINALIZE

CH SETUP
PROTECT DISC
OTHER
UNDO FINALIZE
DVD-RAM Physical Format
SELECT
ENTER ENTER RETURN

REFORMAT

You can format a recorded DVD-RAM/RW.
Check the content of the disc before format. If you for-
mat the disc, the recorded content of the disc will be
erased.
To format a disc in the Video mode, select "REFOR-
MAT AS DVD VIDEO", and to format it in the VR mode,
select "REFORMAT AS DVD VR". You cannot select
"REFORMAT AS DVD VIDEO" when DVD-RAM in-
serted. The screen below will appear.
REFORMAT
START
• When you select "START" and press ENTER, format
will start. The screen below will appear.
REFORMAT
• When you select "CANCEL" and press ENTER, the
DISC SETUP screen will appear.
NOTES:
• When the format finished, "REFORMATTING
COMPLETED PRESS ENTER." will appear. Press
ENTER to clear the screen.
• You cannot format Ver. 1.0 DVD-RW and DVD-R.
• You cannot format a disc if the disc protection is "ON".
In such a case, be sure to cancel the disc protection
(see page 29) before format.
• You cannot format a DVD-RAM in the Video mode.
28
2J40101A P23-33
DISC SETUP
PROCEED
PROCEED
VR
PROCEED
OFF
PROCEED
PROCEED
BACK SETUP END
CANCEL
28
NEW DISC FORMAT
If you insert an unused DVD-RW disc, the disc is auto-
matically formatted.
If you use the DVD-RW (Ver.1.1/1.2), you can select
the mode to be used for automatic format.
Select "NEW DISC FORMAT" and select the mode from
the list below.
VR: Format the disc in the VR mode.
VIDEO: Format the disc in the Video mode.
When you insert an unused disc, the following mes-
sage screen will appear.
NEW DISC FORMAT
START
• When you select "START" and press ENTER, format
will start. The screen below will appear.
INITIALIZING DISC
• When you select "CANCEL" and press ENTER, the
normal TV screen will appear.
NOTES:
• When the Initialization finished, "INITIALIZING
COMPLETED PRESS ENTER" will appear. Press
ENTER to clear the screen.
• If a recorded disc has scratches or contamination on
it, the "NEW DISC FORMAT" screen may appear.
If this happens, select "CANCEL".
FINALIZE
To play a DVD disc recorded on this unit you must finalize
the disc to insure compatibility with other DVD players. In
addition, if you are using a DVD-RW disc you must record
in Video mode.
When "FINALIZE" is selected, the screen below will appear.
FINALIZE
START
• When you select "START" and press ENTER, final-
ization will start. The screen below will appear.
FINALIZING
PLEASE WAIT
• When you select "CANCEL" and press ENTER,
the DISC SETUP screen will appear.
3/4/06, 10:43 AM
CANCEL
CANCEL