Replacing An Earpad On The Srx3 Headset - Honeywell SRX3 User Manual

7. Slide the knob into the slot until it snaps into place.
8. Position the strap to go around the back of your head. The strap swivels

Replacing an Earpad on the SRX3 Headset

1. Hold the headset so that the earpad faces you and the electronics module
2. Grasp the earpad and earpad plate assembly and rotate them to the left to
3. Lift the pad and plate assembly off of the headband.
4. Install the replacement pad.
19
freely on the two knobs so that it can be positioned at the back of the head
for either right-ear or left-ear wearing of the headset.
faces away.
unlock the plate from the headband.
a. Remove the ear pad by pulling it away from the ear pad plate.
b. Slide one side of the new pad over the edge of the ear pad plate and
gently stretch the pad until it covers the plate.
SRX3 User Guide - Preliminary