Checking The Locking Device; Cleaning The Vetter Smartfork - Vetter SmartFork Operating Instructions Manual

Maintenance of the VETTER SmartFork
Maintenance activities > Cleaning the VETTER SmartFork®
6.2.4

Checking the locking device

1.
2.
3.
6.2.5

Cleaning the VETTER SmartFork

Personnel:
Protective equipment:
52
WARNING!
Risk of injury from a defective locking device!
The locking device prevents undesired lateral movement of the
®
SmartFork on the profile of the fork carriage. Uncontrolled movement of
the VETTER SmartFork
slip and cause serious injuries.
– Replace damaged locking devices immediately.
– If the locking device is missing, it must be replaced before start-up.
– Do not use the VETTER SmartFork
Check the open and lock positions of the lever.
Check the locking device for damage and completeness
of the basic fork" on page 26.
Remove any dirt from the locking device.
n Driver of industrial trucks
n Protective work clothing
n Industrial helmet
n Protective gloves
n Safety shoes
Check the following points:
n Regularly clean the VETTER SmartFork
n Do not use a high-pressure cleaning device and do not use any aggressive
cleaning products.
n Clean the fork blade and back/shank with a broom or brush.
n Clean the protective glass of the cameras and sensors with a soft cloth and
soapy water without applying any pressure.
®
SmartFork - The intelligent SensorFork
®
®
during transportation could cause the load to
®
without a locking device.
®
®
.
Ä Chapter 3.1 "Structure
V1.08/2019