6
Maintenance of the VETTER SmartFork
6.1
Maintenance table
Interval
Maintenance work
daily
Visual inspection by the driver
inspection by the driver" on page 50
as required
Cleaning
SmartFork
at least annually* Check the electronics
tronics" on page 51
Fork arms inspection as per ISO 5057
ularly check the fork arms and hooks" on page 51
Check the locking device
locking device" on page 52
* Depending on operating time, wear and use, the operator can independently choose a
much shorter interval.
V1.08/2019
Ä Chapter 6.2.1 "Daily visual
Ä Chapter 6.2.5 "Cleaning the VETTER
®
" on page 52
Ä Chapter 6.2.2 " Checking elec-
Ä Chapter 6.2.4 "Checking the
®
SmartFork
- The intelligent SensorFork
Maintenance of the VETTER SmartFork
Ä Chapter 6.2.3 "Reg-
Maintenance table
®
Personnel
Driver of industrial
trucks
Driver of industrial
trucks
Electrician
Service specialist
Service specialist
49
®