Adjusting The Distance Between The Fork Arms - Vetter SmartFork Operating Instructions Manual

Operation of the VETTER SmartFork

Adjusting the distance between the fork arms

5.10 Adjusting the distance between the fork arms
Personnel:
Protective equipment:
Fig. 29: Locking device overview
1 Lever, locked position
2 Locking groove on the fork carriage
3 Lever, open position
1.
2.
3.
4.
6.
7.
48
Driver of industrial trucks
n
n Protective work clothing
n Industrial helmet
n Protective gloves
n Safety shoes
Raise the VETTER SmartFork
Open the VETTER SmartFork
of the locking device vertically upwards (fig. 30/3).
WARNING!
Risk of crushing the hands when moving!
Grasp the VETTER SmartFork
the side onto the fork carriage.
Align both VETTER SmartForks
Close the locking device of the VETTER SmartFork
Check that the VETTER SmartFork
this is not the case, move the VETTER SmartFork
engages.
®
SmartFork - The intelligent SensorFork
®
®
up from the ground.
®
locking device. To do so, move the lever (fig. 30/1)
® at the head and fork blade and carefully move it to
® equally to the centre of the fork carriage.
® is locked into the locking groove (fig. 30/2). If
® (move the lever again).
®
horizontally until the lock
V1.08/2019