Vetter SmartFork Operating Instructions Manual page 41

Fig. 23: VETTER SmartFork
Operating the 1.
line laser
target function
2.
3.
4.
V1.08/2019
®
Particularly helpful when targeting fork pockets or when lifting a load at
heights that make visibility difficult.
Activate the switching facility of the circuit of the line laser target function.
ð The laser beam in the fork tip is activated.
Move the fork arms in front of the load to be lifted.
ð The laser line is projected horizontally onto the load at the current height of the
fork arm tips.
Adjust the height of the VETTER SmartFork
the insertion position for the load.
Pick up the load.
As an option, the power supply for the line laser can be provided by a
battery. Start-up is carried out via the switching facility of the circuit
Ä Further information on page 30.
®
SmartFork - The intelligent SensorFork
Operation of the VETTER SmartFork
Laser
® until the projected laser line marks
®
VETTER SmartFork® Laser
41