Preventative Maintenance - Jackson Conserver XL2 Series Installation, Operation And Service Manual

MAINTENANCE
PREVENTATIVE
MAINTENANCE
i
!
CAUTION
CAUTION! Do NOT beat
strainers to remove
soil and debris!
07610-002-10-23-U

PREVENTATIVE MAINTENANCE

The manufacturer highly recommends that any maintenance and repairs not specifically
discussed in this manual be performed only by QUALIFIED SERVICE PERSONNEL.
Performing maintenance on your machine may void your warranty, lead to larger
problems, or even cause harm to the operator. So if you have a question or concern, do
not hesitate to contact a QUALIFIED SERVICE AGENCY.
By following the operating and cleaning instructions in this manual, you should get the
most efficient results from your machine. As a reminder, here are some steps to take to
ensure that you are using the
1. Ensure that the water temperatures match those listed on the machine data plate.
Water temperature could be too low for a variety of reasons.
2. Ensure strainers are in place, laying flat, and free of soil and debris before
operating the machine. To clean strainers, wipe them out with a rag and rinse
under a faucet. For stubborn debris, a toothpick can be used. Do not beat
strainers on waste cans; once bent, they will not work properly.
3. Ensure all wash/rinse arms are secure in the machine before operating.
4. Ensure drain stopper is in position before operating.
5. Remove as much soil from ware as possible before loading into racks.
6. Do not overload racks.
7. Ensure glasses are placed upside-down in the rack.
8. Ensure all chemicals being injected into the machine have been verified at the correct
concentrations.
9. Clean the machine at the end of every workday (see Shutdown and Cleaning section).
10. Follow all safety procedures, whether listed in this manual or put forth by local, state,
or national codes/regulations.
the way it was designed to work:
machine
22