Table of Contents
Advertisement
MB6 (6-Slot) Chassis
MB6 Overview
The single rack unit (1RU) MB6 6-Slot chassis is available in three power supply types:
•
F-MB6X-RAC: Redundant AC Power supply (Dual-Input, Dual-Power supply)
•
F-MB6X-MED: Medical Grade AC power supply, Non-Redundant (Single-Input, Single power supply)
•
F-MB6X-DC: DC Power supply, Non-Redundant (Single-Input, Dual-Power supply)
References to "MB6" can be taken to include any of the above, unless specifically stated otherwise.
MB6 Installation
The MB6 may be installed in one of two ways: (1) free-standing on a desktop or rack shelf, or (2) fastened directly
to a rack using support brackets (supplied).
WARNING
To prevent electric shock, do not remove the cover of the MB6 chassis. There are no user-
serviceable parts inside. The MB6 chassis is to be installed and serviced by qualified personnel only.
To install the MB6:
1.
Unpack the box and visually inspect the package contents for any evidence of shipping damage. See the
Important Notice document in the box for a list of contents.
2.
For desktop installation, place the MB6 chassis on a solid surface.
3.
For rack installation, position the MB6 chassis in a rack, using the 4 screws supplied to secure it in place.
NOTE
For 4-post racks, use the brackets supplied to secure the rear of the chassis.
4.
Insert the cards from the front (as shown in
MB6 and MB21 Multichannel Chassis Installation Guide, v2.0, Issue 01
Figure 1: MB6 Chassis Front View
Figure
1).
MB6 (6-Slot) Chassis
MB6 Overview
9
- Quick Links:
- Mb6 Overview
Hide quick links:
Advertisement
Table of Contents
