Connections
Connections
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.
If you are using a cable TV service (CABLE), go to page
Combination VHF/UHF antenna (Single 75
Antenna jack
75
coaxial cable
(not supplied)
Combination VHF/UHF antenna (Separate VHF and UHF 300
Antenna jack
Combiner
(not supplied)
UHF 300
twin-lead
wire (not supplied)
Separate VHF/UHF antennas (75
Antenna jack
Combiner
(not supplied)
UHF 300
twin-lead
wire (not supplied)
14
Antenna jack
300-75
matching
transformer (not supplied)
300-75
matching
transformer (not supplied)
VHF 300
twin-lead
wire (not supplied)
VHF cable and 300
VHF 75
cable
(not supplied)
15
for related connections.
cable or 300
twin-lead wire)
Connect the 75
cable from the combination VHF/
UHF antenna to the antenna jack on the back of the
TV/DVD.
If your combination VHF/UHF antenna has a 300
twin-lead wire, use the 300-75
transformer (not supplied).
1. Connect the UHF 300
combiner (not supplied).
2. Connect the VHF 300
300-75
matching transformer (not supplied).
3. Attach the transformer to the combiner, then
attach the combiner to the antenna jack on the
back of the TV/DVD.
UHF twin-lead wires)
1. Connect the VHF 75
twin-lead wire to the combiner (not supplied).
2. Attach the combiner to the antenna jack on the
back of the TV/DVD.
matching
twin-lead wires)
twin-lead wire to the
twin-lead wire to the
cable and UHF 300