Table of Contents
Advertisement
Eastwood Dual Blaster
allows you to strip, clean and blast with our specially designed "mixing valve" to instantly switch from Soda Media to Abrasive
and back again in seconds.
Before attempting to operate your new blaster, please read these instructions thoroughly. You will need these instructions for the safety warnings,
precautions, assembly, operation, maintenance procedures, parts list, diagrams, and troubleshooting.
The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur.
It must be understood by the operator that a certain level of expertise is required before attempting to operate this equipment.
SPECIFICATIONS
Tank Volume
(2X) 10 gallons / 100 lbs. abrasive or 75 lbs. of soda media.
Hose Length
8 ft. x 1/2" i.d.
Working Pressure
60-125 psi
Air Consumption
6-25 cfm
2
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
Advertisement
Table of Contents
