The EASTWOOD PNEUMATIC METAL SHEAR is a heavy-duty, metal working tool capable of many years of reliable service. It features a high-performance, high-torque, ball bearing motor design with a hardened planetary gear reduction for quick and efficient operation and long life. Easily cuts stainless steel, steel and aluminum.
Page 3
• Rapidly reciprocating Blades will eject metal chips at high velocity. Always wear ANSI approved eye protection when operating this tool. HEARING DAMAGE HAZARD! • The Eastwood Pneumatic Metal Shear emits high sound levels while operating. Use ANSI approved ear protection when operating this tool. BURST HAZARD! •...
Cutting Head adequately to release clamping pressure (FIG 1). • Rotate the Cutting Head about the axis of the Shear Body to the desired position then re-tighten the three screws. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
FIG. 3 4. Remove Blades & Bushing/Spacers. Carefully note the position of the Blades and Bushing/ Spacers for proper position during reassembly! (Fig 3). To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 6
NOTE: The Body may need to be rotated from side to side to allow the eccentric bearing to align within the arms of the Center Blade. 11. Tighten all three Socket Head Screws securely. 12. The Metal Shear is, once again, ready for use. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
Out of balance condition from Stop use immediately, check for and replace damaged cracked or broken Cutting Blade. Tool Vibrates Cutting Blade Excessively During Use Loose Clamping Tighten loose Clamping Screws. Screws To order parts and supplies: 800.343.9353 >> eastwood.com...
CRC Blue Layout Fluid If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: tech@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com...