Table of Contents
Advertisement
The EASTWOOD PNEUMATIC METAL SHEAR is a heavy-duty, metal working tool capable of many
years of reliable service. It features a high-performance, high-torque, ball bearing motor design with a
hardened planetary gear reduction for quick and efficient operation and long life. Easily cuts stainless
steel, steel and aluminum. Equipped with a 360° positionable cutting head for hard to access projects.
CONTENTS
(1) Pneumatic Metal Shear
(1) 4mm Hex Key
SPECIFICATIONS
Maximum Material Thickness:
Mild Steel, Aluminum and Copper: 18 Ga (0.050" [1.2mm])
Stainless Steel: 20 Ga (0.036") [0.91mm]
Air Consumption:
Maximum Operating Pressure: 90 PSI [6.2bar]
Strokes Per Minute:
Inlet Thread Size:
Motor Construction:
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information
provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
2
(1) 1/4" NPT Male Quick Disconnect Fitting
(1) #13474 Replacement Blade Set
4 CFM @ 90 PSI [113 L/min @ 6.2bar]
2,500
1/4" FNPT
4 Vane, Ball Bearing Air Motor with Planetary Gear Set
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Advertisement
Table of Contents
