Table of Contents
Advertisement
INCLUDES
(1) Dual Tank Assembly
(pre-assembled with: Lower Frame and
Axle Assembly; Inlet Manifold Assembly)
(1) Upper Loop Frame
(2) Wheels
(1) Front Support Loop
(1) Blast Discharge Nozzle (Dead Man Valve)
(w/ 3.5mm Nozzle, #12113, installed)
(1) 2mm Nozzle
(1) 2.5mm Nozzle
(1) 3.0mm Nozzle
NOTE: ABRASIVE BLASTING HOSES MARKED WITH RED VALVES – SODA BLASTING HOSES MARKED WITH GREEN VALVES
Upper Loop Frame
Wheels
Front Support Loop
4
(1) Deadman Valve Sealing Pad
(1) Blast Hose Assembly with 2-1 Manifold
(1) Moisture Trap / Inlet Valve
(1) Pressure Gauge
(1) Face Shield
(1) Funnel
(1) Tefl on Tape
(4) Washers
(4) Cotter Pins
(4) 1/2" Long Socket Head Cap Screws
(1) Hex Wrench
Abrasive Tank
(red valves)
Mounting Tabs
Mounting Tabs
Blast Hoses
Inlet Manifold
Soda Tank
(green valves)
Moisture Trap/Inlet Valve
Face Shield
2-1 Manifold
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
Pressure
Gauge
Hardware/
Tefl on Tape
Funnel
Blast Discharge
Nozzle (Dead
Man Valve)
Advertisement
Table of Contents
