Toro Greensmaster eTriFlex 3370 Operator's Manual page 17

1. Front left cutting motor
2. Front right cutting-unit
motor
•
Traction information screen
shows the current steering angle and the
amperage allotted to each traction motor.
1. Amperage—Front, left
traction motor
2. Amperage—Front, right
traction motor
•
Main menu: refer to
Menu Items (page
Note:
Protected under Protected
Menus—accessible only by entering PIN;
refer to Accessing Protected Menus (page
You can switch between the main, CU motor, and
traction information screens by pressing the right
button and then selecting the appropriate directional
arrow.
Figure 22
3. Center cutting-unit motor
(Figure
Figure 23
3. Amperage—Center
traction motor
4. Steering angle
Understanding the InfoCenter
18).
20).
g292767
23):
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—Press this
button to access the InfoCenter menus. You can
use it to back out of any menu you are currently
using.
g292769
•
Middle Button—Use this button to scroll down
menus.
•
Right Button—Use this button to open a menu
where a right arrow indicates additional content, or
to select an option.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button will be labeled with an icon displaying its
current function.
InfoCenter Icon Description
SERVICE DUE
17
Figure 24
3. Middle button
4. Left button
Indicates when scheduled service
should be performed
Hour meter
Info icon
Function-control switch is in the
T position.
RANSPORT
Function-control switch is in the M
position.
Indicates when the cutting units are
being raised.
Indicates when the cutting units are
being lowered.
Operator must sit in seat
g020650
OW