Side-Discharging The Clippings - Toro Super Recycler 20382 Operator's Manual

1. Lever
Note:
To unlock the plug, rotate the lever on
the plug to the right
5. Lower the discharge deflector.
Side-Discharging the
Clippings
Use the side-discharge feature for cutting very tall
grass.
If the bag is on the machine, remove it and insert the
rear-discharge plug; refer to
(page 13) before side-discharging the clippings.
Important:
Ensure that the rear-discharge plug
is locked in place. To lock the plug: Raise the
discharge deflector (Figure
plug in until it snaps into place behind the tabs,
and rotate the lever on the plug to the left
26).
Figure 26
2. Tabs
(Figure 26).
Removing the Grass Bag
27), firmly push the
1. Discharge deflector
Note:
To unlock the plug, rotate the lever on the plug
to the right
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury.
Stop the engine and wait for all moving parts
to stop before leaving the operating position.
Installing the Side-Discharge
Chute
1. Unlock the side-discharge door
g010084
2. Lift open the side-discharge door
(Figure 3. Install the side-discharge chute and close the
door onto the chute
14
Figure 27
2. Rear-discharge plug
(Figure 26).
Figure 28
Figure 29
(Figure
g017463
(Figure 28).
g002590
(Figure 29).
g002591
30).