Installing The Recoil-Starter Rope; Filling The Engine With Oil - Toro Super Recycler 20382 Operator's Manual

Figure 4
4. Lock the handle at your desired height. Refer to
Adjusting the Handle Height (page
5. Torque the handle bolts to 14 to 17 N-m (120
to 160 in-lb).
6. Adjust the cutting height. Refer to
Cutting Height (page
10).
Adjusting the
10).
2
Installing the Recoil-Starter
Rope
No Parts Required
Procedure
Important:
To start the engine safely and easily
whenever you use the machine, install the
recoil-starter rope in the rope guide.
Hold the blade-control bar to the upper handle and
pull the recoil-starter rope through the rope guide on
the handle (Figure
g017479
1. Recoil-starter rope
3

Filling the Engine with Oil

No Parts Required
Procedure
Important:
Your machine does not come with oil
in the engine. Before starting the engine, fill the
engine with oil.
1. Move the machine to a level surface.
2. Remove the dipstick
3/4 of the crankcase capacity of oil into the oil-fill
tube.
Note:
Max. fill: 0.55 L (18.6 oz), type: SAE 30
detergent oil with an API service classification of
SF, SG, SH, SJ, SL, or higher.
6
5).
Figure 5
2. Rope guide
(Figure 6) and pour about
g003251