Remove The Machine From Storage - Toro Super Recycler 20382 Operator's Manual

2. To unfold the handle, refer to
Unfolding the Handle (page
Remove the Machine from
Storage
1. Check and tighten all fasteners.
2. Remove the spark plug and spin the engine
rapidly by pulling the recoil-start handle to blow
the excess oil from the cylinder.
3. Install the spark plug and tighten it with a torque
wrench to 20 N-m (15 ft-lb).
4. Perform any maintenance procedures; refer to
Maintenance (page
5. Check the engine-oil level; refer to
Engine-Oil Level (page
6. Fill the fuel tank with fresh gasoline; refer to
Filling the Fuel Tank (page
7. Connect the wire to the spark plug.
Figure 41
1 Assembling and
5).
16).
Checking the
9).
9).
g017492
21