Maintenance; Recommended Maintenance Schedule(S); Preparing For Maintenance - Toro Super Recycler 20382 Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
Before each use or daily
Every 25 hours
Before storage
Yearly
Important:
Refer to your engine owner's manual for additional maintenance procedures.

Preparing for Maintenance

1. Stop the engine and wait for all moving parts to
stop.
2. Disconnect the spark-plug wire from the
spark plug (Figure
maintenance procedure.
Figure 32
3. After performing the maintenance procedure(s),
connect the spark-plug wire to the spark plug.
Important:
Before tipping the machine to
change the oil or replace the blade, allow the
fuel tank to run dry through normal usage. If
you must tip the machine prior to running
out of fuel, use a hand fuel pump to remove
the fuel. Always tip the machine onto its side
with the dipstick down.
Maintenance Procedure
• Change the engine oil.
• Check the engine oil level.
• Service the air cleaner.
• Ensure that the engine stops within 3 seconds after releasing the blade-control bar.
• Clean grass clippings and dirt from under the machine.
• Lubricate the rear wheel gears.
• Replace the blade or have it sharpened (more frequently if the edge dulls quickly).
• Empty the fuel tank before repairs as directed and before annual storage.
• Service the air cleaner.
• Change the engine oil.
32) before performing any
WARNING
Tipping the machine may cause the
fuel to leak. Gasoline is flammable and
explosive and can cause personal injury.
Run the engine dry or remove the
gasoline with a hand pump; never
siphon.
g002901
16