STIEBEL ELTRON WPM G Operation

Programming unit
Hide thumbs Also See for WPM G:

Advertisement

Quick Links

OPERATION
Programming unit
» WPM G

Advertisement

Table of Contents
loading

Summary of Contents for STIEBEL ELTRON WPM G

  • Page 1 OPERATION Programming unit » WPM G...
  • Page 2: Table Of Contents

    Symbol Meaning Material losses (appliance damage, consequential losses and environmen- tal pollution) Appliance disposal f This symbol indicates that you have to do something. The ac- tion you need to take is described step by step. | WPM G www.stiebel-eltron.com...
  • Page 3: Safety

    The symbol shows the activated function. Activate or deactivate functions The symbol shows the deactivated function. Select one of two options Select one of two options Receive further information www.stiebel-eltron.com WPM G |...
  • Page 4: Start Screen

    (see chapter "Settings / Adjusting the heating circuit / Adjusting the heating curve"). "Heating" menu "DHW" menu "Heating circuit control" menu "Pool" menu "Cooling" menu Pasteurisation program active | WPM G www.stiebel-eltron.com...
  • Page 5: System Information

    Select the required language. is displayed. f Press the button to return to the higher ranking menu. Alter- native f Press the button to return to the main menu. www.stiebel-eltron.com WPM G |...
  • Page 6: Setting Date And Time

    Summer mode f Set the outside temperature above which the heat pump is no longer available to heat the building. When the temperature falls below this setting, the heat pump will start to heat the building again. | WPM G www.stiebel-eltron.com...
  • Page 7: Adjusting The Temperature (Dhw)

    Press the button to return to the higher ranking menu. Alter- native f Press the button to return to the main menu. Parameter Function DHW mode f Switch the function on or off. Current DHW temperature www.stiebel-eltron.com WPM G |...
  • Page 8: Adjusting The Temperature (Pool)

    Reset to factory settings The values on the current menu page are reset to the factory settings. Shows that the heating curve settings apply for underfloor heating. Only visible after the access code has been entered. | WPM G www.stiebel-eltron.com...
  • Page 9 The higher the value, the more f Confirm the selection. influence the room sensor has. Room temperature Temperature captured by room sensor www.stiebel-eltron.com WPM G |...
  • Page 10: Selecting The Operating Mode

    Version information Note Model: The selected operating mode lights up. Selected heat pump Graphs Graphics about temperatures and runtimes of the heat pump over a certain period of time. Swiping allows you to switch between individual graphs. | WPM G www.stiebel-eltron.com...
  • Page 11: Further Settings

    Ensure that you select the same connection for all heat pumps. f Press the button on the start screen to open the main menu. f Press the button. f Select the "System settings" menu. f Select the "Network settings" menu. www.stiebel-eltron.com WPM G |...
  • Page 12: Logging

    Press the button on the start screen to open the main menu. f Press the button. f Select the "Room temperature sensor" menu. f Slide the switch to the corresponding position. f Slide the switch to the corresponding position. | WPM G www.stiebel-eltron.com...
  • Page 13: Messages

    If the message cannot be acknowledged, and the booster heater is enabled for heating and DHW mode, the booster heater covers the heat demands. f Press the screen to deactivate the screensaver. f Press the button to display the active message. www.stiebel-eltron.com WPM G |...
  • Page 14 This will not affect warranties issued by any importers. Environment and recycling We would ask you to help protect the environment. After use, dispose of the various materials in accordance with national regulations. | WPM G www.stiebel-eltron.com...
  • Page 15 NOTES www.stiebel-eltron.com WPM G |...
  • Page 16 Deutschland Verkauf Tel. 05531 702-110 | Fax 05531 702-95108 | info-center@stiebel-eltron.de STIEBEL ELTRON GmbH & Co. KG Kundendienst Tel. 05531 702-111 | Fax 05531 702-95890 | kundendienst@stiebel-eltron.de Dr.-Stiebel-Straße 33 | 37603 Holzminden Ersatzteilverkauf Tel. 05531 702-120 | Fax 05531 702-95335 | ersatzteile@stiebel-eltron.de Tel.

Table of Contents