Symbol Meaning Material losses (appliance damage, consequential losses and environmen- tal pollution) Appliance disposal f This symbol indicates that you have to do something. The ac- tion you need to take is described step by step. | WPM G www.stiebel-eltron.com...
The symbol shows the activated function. tain settings and display information on the operation of the heat pump. Activate or deactivate functions The symbol shows the deactivated function. Select one of two options Select one of two options www.stiebel-eltron.com WPM G |...
“Heating circuit control” menu (only when “Ac- tivate heating circuit x” function is activated) “Pool” menu (only when “Pool” function is ac- tivated) “Cooling” menu (only when “Passive cooling” or “Active cooling” function is activated) Pasteurisation program is active | WPM G www.stiebel-eltron.com...
Select the required language. is displayed. either f Press the button to return to the higher ranking menu. f Press the button to return to the main menu. www.stiebel-eltron.com WPM G |...
If you regularly have to make changes to the room temperature in this way, adjust the heating curve (see chapter “In the “Heating” menu”). either f Press the button to return to the higher ranking menu. f Press the button to return to the main menu. | WPM G www.stiebel-eltron.com...
Page 7
When the temperature falls below this code has been entered. setting, the heat pump will start to heat the building again. f Set the minimum flow temperature Min. flow for the heat pump to feed into the heating system. www.stiebel-eltron.com WPM G |...
Press the button. f Make the required changes. f Confirm the selection. either f Press the button to return to the higher ranking menu. f Press the button to return to the main menu. | WPM G www.stiebel-eltron.com...
Set whether the temperature is measured actively or passively. If the temperature is measured actively, the room sensor influences the heating mode. f Set the temperature to which the as- Set temperature signed rooms should be heated. www.stiebel-eltron.com WPM G |...
The booster heater is only available for with service heating mode. The primary heat pump mode and switches off all the heat pumps. activated booster heater) Standard The heat pump is in operation. operation Note The selected operating mode lights up. | WPM G www.stiebel-eltron.com...
Press the button on the start screen to open the main menu. Diagrams on temperatures and runtimes of the heat pump over a specific period. Swiping allows you to switch between individual f Press the button. graphs. Parameter Unit °C Current DHW temperature www.stiebel-eltron.com WPM G |...
If you want to terminate the report logging, deacti- vate the “Logging” function. f Press the button to return to the main menu. A message appears when the report logging has finished. f Remove the USB stick. either | WPM G www.stiebel-eltron.com...
If the message cannot be acknowledged, and the booster heater is enabled for heating and DHW operation, the booster heater covers the heat demands. f Press the screen to deactivate the screensaver. f Press the button to display the active message. www.stiebel-eltron.com WPM G |...
Page 14
This will not affect warranties issued by any importers. Environment and recycling We would ask you to help protect the environment. After use, dispose of the various materials in accordance with national regulations. | WPM G www.stiebel-eltron.com...