Advertisement
Alarms
Causes
Wi-Fi Led Status
Indicator light flashes slowly
Indicator light is on
Indicator light flashes quickly
Indicator light is off
Reasons
Filter blockage
Bent pipes or poor water
flow through
the plastic
pipes of the liner
Debris
screens
are
blocked:
debris
screens
can
become
blocked by hard water due to
calcium build-up.
Waiting to connect to the router
Connected to the router
Lost Wi-Fi signal
Light damaged & Wi-Fi module has
problem
Solutions
Clean the filter and check for damage. Replace or
re-install as necessary. For assistance, please visit
the
support
section
on
www.bestwaycorp.com.
Please check through the spa connection to see if
the pipes are bending. F
Empty the spa and place a garden hose inside the pipes
to wash he debris. To be sure all debris is removed,
perform the operation from the outside and inside of
the spa.
Use a toothbrush to remove any stubborn debris.
For assistance, please visit the support section on our
website, www.bestwaycorp.com.
Check the washers inside the coupling for
damage. Unscrew the couplings and remove the
washer for further inspection.
F
The pump is ready to connect to your phone
The pump already connected to your phone
Check the status of your router. The spa lost
the Wi-Fi signal.
For more information, please get assistance visiting our
website www.bestwaycorp.com support section.
our
website,
Advertisement
