Relay Out - Honeywell PX4ie Installation Manual

Pin Signal
22 MediaOut_C
7 MediaOut_E
37 RibbonOut_C
23 RibbonOut_E
8 DataReady_C
38 DataReady_E
24 VOID_C
9 VOID_E
39 RTWOUTEXT_C
25 RTWOUTEXT_E

Relay Out

The applicator card support 4 relay output ports. The relay of the OUT ports are
configured using the DC 5V and DC 24V settings. Relay 1 and Relay 3 are
configured by DC 5V setting and Relay 2 and Relay 4 are configured by DC 24V
setting. DC 5V and DC 24V settings are legacy applicator card settings, no
power is supplied by PX4IE/6IE applicator card. Any signals that are within the
max load breaking capacity of the relay can be connected to the relays.
Max AC Load Breaking Capacity
Signal Description
I Current
Psw AC Switching power
Vsw AC Switching voltage
Applicator Interface Kit Installation Guide
Description
Media Out Collector Opto Out Channel
Media Out Emitter Opto Out Channel
Ribbon Out Collector Opto Out Channel
Ribbon Out Emitter Opto Out Channel
Data Ready Collector Opto Out Channel
Data Ready Emitter Opto Out Channel
VOID Collector Opto Out Channel
VOID Emitter Opto Out Channel
External output signal for Ready-to-Work
Indicator Collector Opto Out Channel
External output signal for Ready-to-Work
Indicator Emitter Opto Out Channel
Max.
1A
100VA AC
100V AC
11