Download Print this page

Honeywell PX4ie Installation Manual page 18

Applicator interface kit
Hide thumbs Also See for PX4ie:

Advertisement

Signal
Ribbon out
RFIDTagError
RTWOUTEXT
SERVICEREQ
(Service
Required)
Applicator Interface Kit Installation Guide
Description
Asserted when the printer is out of ribbon. Activates an
SHM RibbonOut event in the System Health Monitor
(SHM). De-asserted when the same event is deactivated.
Asserted when an error related to the RFID tag is occurred
during print job and voids the labels. De-asserted when the
printer attempts to reprint the problematic label.
Unsuccessful reprint will re-assert RFIDTagError signal and
an error is reported to System Health Monitor (SHM).
External output signal for the Ready-to-Work indicator.
Behavior depends on the current setup. Signal may be
asserted when there are no active events in the System
Health Monitor (SHM), when the printer motor is idle, or
both. This signal is inactive when the Error Port option is
disabled.
Asserted low when an event in the System Health
Monitor (SHM) is activated. De-asserted when no events
are active in the SHM. Supported only by I-Style.
A "service required" event is also activated when the
Error Port is enabled and any applicator errors is
detected. This signal is also asserted when the Error on
Pause option is enabled.
17

Advertisement

loading

This manual is also suitable for:

Px6ie