Impact Drill Safety Warnings - iBell Tools IBL ID 13-80 Operator's Manual

 Wear ear protectors when impact drilling. Exposure to noise can
cause hearing loss.
 Use auxiliary handle supplied with the tool. Loss of control can
cause personal injury.
 Hold power tool
performing an operation where the cutting accessory may contact
hidden wiring or its own cord. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
 Always wear safety goggles or eye protection when using this
tool. Use a dust mask or respirator for applications which
generate dust.
 Secure the material being drilled. Never hold it in your hand or
across legs. Unstable support can cause the drill bit to bind
causing loss of control and injury.
 Place the switch in the locked or off position before making any
assembly, adjustments or changing accessories. Such preventive
safety measures reduce the risk of starting the tool accidentally.
 Position yourself to avoid being caught between the tool or side
handle and walls or post. When the bit become bound or jammed
in the work, the reaction torque of the tool could crush your hand
or leg.
 If the bit becomes bound in the work piece, release the trigger
immediately, reverse the direction of rotation and slowly squeeze
the trigger to back out the bit. Be ready for a strong reaction torque.
The drill body will tend to twist in the opposite direction as the
drill bit is rotating.
 Do not grasp the tool or place your hands too close to the spinning
impact drill chuck or drill bit.
 When installing a drill bit, insert the shank of the bit well within
the jaws of the chuck. If the bit is not inserted deep enough, the
grip of the jaws over the bit is reduced and the loss of control
is increased.
 Do not use dull or damaged bits and accessories. Dull or
damaged bits have a greater tendency to bind in the work piece.

IMPACT DRILL SAFETY WARNINGS

by insulated gripping
6
surfaces,
IBL ID13-80|TD13-100
when