iBell Tools IBL ID 13-80 Operator's Manual page 8

 When removing the bit from the tool avoid contact with skin and
use proper protective gloves when grasping the bit or accessory.
Accessories may be hot after prolonged use.
 Check to see that keys and adjusting wrenches are removed from
the drill before switching the tool "ON". Keys or wrenches can fly
away at high velocity striking you or bystander.
 Do not run the drill while carrying it at your side. A spinning
drill bit could become entangled with clothing and injury may
result.
 Avoid bouncing and snagging the wheels, discs or brushes
especially when working corners, sharp edges, etc. This can cause
loss of control and kickback.
SYMBOLS
On the product or on the packing box, the rating label and within
these instructions you will find among others the following symbols
and abbreviations. Familiarize yourself with them to reduce hazards
like personal injuries and damage to property.
Caution / Warning
Wear protective gloves
This product is of protection class II. That means it is
equipped with enhanced or double insulation
Wear hearing and eye protection
Wear dust mask
IBL ID13-80|TD13-100
7