Advertisement
UNPACKING AND ENSURING
Unpack all parts and lay them on flat, stable surface. Remove all
packing materials. Make sure the delivery contents are complete
and free of any damage. If you find that parts are missing or
show damage, do not use the product but contact your dealer.
Using an incomplete or damaged product represents a hazard to
people and property.
Ensure that you have all the accessories and tools needed for
assembly and operation. This also includes suitable personal
protective equipment.
WARNING!
operation! Do not use a product that is only partly assembled or
assembled with damaged parts! Follow the assembly instructions
step-by-step and use the pictures provided as a visual guide to
easily assemble the product! Do not connect the product to power
supply before it is completely assembled!
INTENDED USE
The product is intended for driving in, loosening screws as
well as for drilling in wood, steel, concrete and also for
hammering. It should not be used for working on materials that
are dangerous to health.
This tool has a chuck capacity of 13 mm that can be used for
screwing and unscrewing, and a drilling capacity of 12 mm for
steel, 13mm for concrete and 25 mm for wood.
For safety reasons it is essential to read the entire instruction
manual before first operation and to observe all the instructions
mentioned in it.
The product must be fully assembled before
SETUP
10
IBL ID13-80|TD13-100
Hide quick links:
Advertisement
