Advertisement
Quick Links
Advertisement
Related Manuals for iBell Tools ED10-30/06-91
Summary of Contents for iBell Tools ED10-30/06-91
- Page 1 ED10-30|06-91...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. GENERAL POWER TOOL SAFETY WARNINGS __________ 2. ELECTRIC DRILL SAFETY WARNINGS__________________ 3. PRODUCT OVERVIEW _________________________________ 4. PRODUCT SPECIFICATIONS ___________________________ 5. SETUP _________________________________________________ 6. PRODUCT FUNCTIONS ________________________________ 7. GENERAL OPERATION ________________________________ 8. TROUBLESHOOTING __________________________________ IBL ED 10-30|06-91... -
Page 4: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings, instructions, illustrations WARNING! and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - Page 5 PERSONAL SAFETY Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs or alcohol. A moment of inattention while operating power tools may result in serious personal injury.
- Page 6 POWER TOOL USE AND CARE Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off.
-
Page 7: Electric Drill Safety Warnings
ELECTRIC DRILL SAFETY WARNINGS Hold the tool by insulated gripping surfaces when performing an operation. Use firm pressure when drilling, but do not press too hard. Too much pressure will not help the process and will cause the bit to overheat, may cause the bit to bend or break, cause undue strain on the tool, and may damage the bit or work piece. - Page 8 Check to see that keys and adjusting wrenches are removed from the drill before switching the tool ‘ON’. Keys or wrenches can fly away at high velocity striking you or bystander. Designate a work area that is clean and well-lit. The work area must not allow access by children or bystanders to prevent injury and distraction.
-
Page 9: Product Overview
PRODUCT OVERVIEW IBL ED10-30 1. Chuck (Keyed) 2. Forward/Reverse rotation control lever 3. ON/OFF trigger switch 4. Variable speed control 5. Switch lock on button IBL ED 10-30|06-91... - Page 10 IBL ED06-91 1. Chuck (Keyed) 2. Forward/Reverse rotation control lever 3. ON/OFF trigger switch 4. Variable speed control 5. Switch lock on button IBL ED 10-30|06-91...
-
Page 11: Product Specifications
PRODUCT SPECIFICATIONS IBL ED10-30 Rated voltage : 230V~50Hz Rated Input Power : 500W Rated no load speed : 0-2800 rpm Weight : 1.35 Kg Chuck capacity : 10 mm - 15 mm : Wood Drilling capacity - 10 mm Steel - 10 mm Concrete : Class II... -
Page 12: Setup
SETUP UNPACKING AND ENSURING Unpack all parts and lay them on flat, stable surface. Remove all packing materials. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage, do not use the product but contact your dealer. Using an incomplete or damaged product represents a hazard to people and property. -
Page 13: Product Functions
PRODUCT FUNCTIONS AND ASSEMBLY ON/OFF SWITCH AND LOCK-ON BUTTON Switch the device ON by pressing the ON/OFF switch (3) and OFF by releasing the switch. It is also a variable speed switch that delivers higher speed and torque with higher pressure. For continuous operation, Press ON/OFF switch then lock-on button (5), release ON/OFF switch first and lock-on button... - Page 14 FORWARD / REVERSE ROTATION CONTROL Change the rotational direction from forward to reverse by turning the forward/reverse rotation lever (4). Rotational Position Application direction Drilling into material - 1 - Loosen drill bits - 2 - 1. Move the forward/reverse rotation control lever to the left (as seen from the operator position) in order to use the product in a clockwise rotational mode.
- Page 15 MOUNTING/ REMOVILNG DRILL BIT Always use drill bits according to the intended WARNING! use! Never use a drill bit intended for working on wood for working on steel or vice versa! Observe the technical requirements of this product when purchasing and using drill bits! Some drill bits become hot during use, handle them carefully! Wear protective gloves! ...
-
Page 16: General Operation
GENERAL OPERATION Do not use the product if it is damaged or shows WARNING! wear. Switch the product off immediately if you are disturbed while working by other people entering the working area. To ensure you are drilling on a level plane, use the built-in level on the top of the Drill. - Page 17 CLEANING AND STORAGE Keep the product clean. Remove debris from it after each use and before storage. Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean this product as they might be harmful to its surfaces. Regular and proper cleaning will help ensure safe use and prolong the life of the product.
-
Page 18: Troubleshooting
TROUBLESHOOTING Suspected malfunctions are often due to causes that the users can fix themselves, therefore check the product using this section. In most cases the problem can be solved quickly. Problem Possible Cause Solution 1.1 No power supply 1.1 Check the plug on 1.2 Product damaged the power supply 1. - Page 19 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. Do not dispose this product by normal household waste, but take it to a collection point and recycling of electrical and electronic equipment.