AUXILIARY HANDLE
Slide the handle onto the drill and
rotate to the desired working
position. To clamp the auxiliary
handle, rotate the handgrip clockwise.
To loosen the auxiliary handle, rotate
the handgrip anticlockwise. Use the
nut knob also to tighten/loosen.
Always use the auxiliary handle.
INSTALLING THE DEPTH GAUGE
The depth gauge can be used to set a constant depth to drill. To
use the depth gauge, loosen the nut knob section on the handle.
Insert the depth gauge through hole in handle. Slide the depth
gauge to required depth and tighten fully.
Nut
knob
IBL ID13-80|TD13-100
15