Fitting The Backrest - Mercedes-Benz A-Class Series Owner's Manual

Warning symbol on the connector of the rear seat
belt status indicator
Press seat belt buckle : on the grooved
X
surface and remove seat belt buckle :
from holder =.
i
When the ignition is switched on, a mes-
sage is displayed for the corresponding
rear seats in the upper multifunction dis-
play. If, for example, both connectors are
removed, the message:
seat belt engaged
Stow connector : in connector
X
holder ; in the vehicle floor.
Pull lever = upwards and hold it securely.
X
7No rear
appears.
Pull left-hand or right-hand release han-
X
dle ? on backrest A.
Corresponding seat backrest A is
released.
Fold backrest A forwards past the vertical
X
to an angle of approximately 20˚.
Hold backrest A with your free hand and
X
lift the backrest by pulling lever =.
i
For greater convenience, there is a recess
on the rear of the ⅔ backrest which makes
it easier to grasp the backrest.
Remove backrest A from the vehicle
X
through the rear door.

Fitting the backrest

Place the backrest, starting with the seat's
X
front feet, onto the locking bolts in
recesses :.
Stowage areas
Z
197