Setup Menu; Resetting To Factory Settings - Mercedes-Benz A-Class Series Owner's Manual

Setup menu

Introduction
The Settings menu allows you to:
restoring the factory settings
R
changing the instrument cluster settings
R
changing the time/date settings
R
changing the light settings
R
changing the vehicle settings
R
changing the convenience settings
R

Resetting to factory settings

For safety reasons, not all functions will be
reset: permanent SPEEDTRONIC can only be
set in the Vehicle submenu. The
mode setting in the Lighting
reset if the vehicle is stationary.
Press V or U on the steering wheel
X
to select the Settings
Press and hold the reset button on the left
X
of the instrument cluster for approximately
three seconds.
A prompt appears in the multifunction dis-
play asking you to confirm by pressing the
reset button again.
This function is not available on vehicles with Audio 50 APS, Audio 55 APS or COMAND APS.
30
31 Vehicles for the United Kingdom: the digital speedometer always displays km/h.
30
Headlamp
submenu is only
menu.
Menus and submenus
Press the reset button again.
X
The settings of most functions are restored
to the factory settings.
or
If you want to retain the settings, do not
X
press the reset button a second time.
After approximately five seconds, the
tings menu reappears.
Press V or U to select a different
X
menu.
Instrument cluster
Selecting the unit of measurement for dis-
tance
The Display unit Speed-/odom.
allows you to choose whether certain displays
appear in kilometres or miles.
The selected unit of measurement for dis-
tance applies to:
R the digital speedometer
the total distance recorder and the trip
R
meter
the trip computer
R
the navigation instruction in the Naviga-
R
tion menu
SPEEDTRONIC
R
Press V or U on the steering wheel
X
to select the Settings
Press the & button to select submenus.
X
Press W or X to select the
X
cluster submenu.
Press & to select
X
Speed-/odom..
Press the W or X button to select
X
km or miles as the unit of measurement for
distance.
Press the &, V or U button to
X
select a different display.
Set‐
function
31
menu.
Inst.
Display unit
Z
159