Changing The Front Bulbs; Removing/Fitting The Washer Fluid Reservoir - Mercedes-Benz A-Class Series Owner's Manual

Table of Contents

Advertisement

Tail lamp
Brake lamp/tail lamp: P 21 W
:
Reversing lamp: P 21 W
;
Turn signal lamp: PY 21 W
=
Rear foglamp/tail lamp: P 21 W
?
Licence plate lamp
Licence plate lamp: C 5 W
:

Changing the front bulbs

Removing/fitting the washer fluid res-
ervoir
You must remove the washer fluid reservoir
in the engine compartment before replacing
the bulbs of the left-hand headlamp.
To remove: turn catch : anti-clockwise.
X
Remove washer fluid reservoir ; from
X
bracket =.
Place washer fluid reservoir ; with con-
X
necting hoses to one side. Make sure that
no washer fluid escapes.
To fit: guide the lower retaining lug into the
X
rubber grommet on the longitudinal mem-
ber and fit washer fluid reservoir ; into
bracket =.
Turn catch : clockwise.
X
Dipped-beam headlamps (halogen
headlamps)
Switch off the lights.
X
Open the bonnet.
X
Left-hand headlamp: remove the washer
X
fluid reservoir (
page 89).
Y
Press retaining lug : down and remove
X
housing cover ;.
Turn bulb holder = anti-clockwise and pull
X
it out.
Changing bulbs
Z
89

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

A 160A 160 36A 160 cdiA 160 cdi 36A 180A 180 36 ... Show all

Table of Contents