Connecting A Pc - Toshiba 46UL610U Owner's Manual

Connecting a PC

You can view your PC's display on the TV and hear the
sound from the TV's speakers.
Connecting to the TV's PC IN terminal
You will need:
•Analog RGB (15-pin) computer cable
•Analog audio cable
TV back panel
PC
PC audio
output
Conversion adapter
(if necessary)
Before using the PC:
See "Using your PC with the TV" (- p. 51).
To use a PC:
• Set the monitor output resolution on the PC before
connecting it to the TV.
•Supported signal formats: VGA, SVGA, XGA, WXGA,
and SXGA. For signal specifications, see p. 85.
Note:
• The PC audio input terminal on the TV is shared with the
HDMI 4 and ColorStream HD2 terminal. For
configuration, see "Setting the PC audio" (- p. 51).
• Some PC models cannot be connected to this TV.
• If the PC has a compatible mini D-sub15-pin terminal, an
adapter is not required.
• Depending on the content's title and the PC's
specifications, some scenes may be skipped or you may
not be able to pause during multi-angle scenes.
22
Chapter 2: Connecting your TV
Analog
audio
Analog
cable
RGB
computer
cable
Signal names for mini D-sub 15-pin connector
Pin Signal Pin
No. name No.
1 R 6
2 G 7
3 B 8
4 NC * 9
5 NC 10
* NC=Not connected
Connection to the TV's HDMI terminal
You will need:
If your PC has DVI terminal:
•HDMI-to-DVI adapter cable
•Analog audio cable
If your PC has an HDMI terminal:
•HDMI cable
TV back panel
PC
PC audio
output
Supported signal formats: VGA, SVGA, XGA, WXGA,
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i
(60Hz), and 1080p (24Hz/60Hz). For signal
specifications, see p. 86.
Note:
• The edges of the picture may be hidden.
• The PC audio input terminal on the TV is shared with the
HDMI 4 and ColorStream HD2 terminal. For
configuration, see "Setting the PC audio" (- p. 51).
Signal Pin Signal
name No. name
Ground 11 NC
Ground 12 NC
Ground 13 H-sync
NC 14 V-sync
Ground 15 NC
Analog
audio
cable
HDMI-to-
DVI
adapter
cable