Toshiba 46UL610U Owner's Manual page 36

To remove the battery:
Drain the battery before disassembling.
Note: This is an explanation for disposal of the 3D glasses,
not for modification. Once disassembled, the battery
cannot be recovered.
1
Fold the frame with no
power switch, and use a
Phillips-head
screwdriver to remove
the two screws on the
inside of the hinge.
2
Fold the frame inward to
remove it from the side
cover.
If it is hard to remove,
•
insert a flat-head
screwdriver or the like
to force it open.
3
Remove the battery from
the inside of the side
cover and cut the two
cords one by one with
scissors.
• Insulate the cords of the
removed battery with
vinyl tape or the like.
Warning
• Do not nail, hammer, or step on the battery.
Doing so may cause a short circuit, leading to
overheating, cracking, or fire.
• Do not overheat, disassemble, or short-circuit the
battery, or throw it into fire.
Doing so may cause cracking or fire.
• Do not connect the battery cord with metal items
such as wires. Also, do not carry or store the
battery with metal items such as necklaces or
hairpins.
Doing so may cause a short circuit, leading to
overheating, cracking, or fire.
Note:
• To avoid injury, use caution when removing the battery.
• Follow local regulations for disposal of this product.
This symbol is only applicable in European
Union countries.
This symbol is only applicable in China.
36
Chapter 6: Basic features
Specifications:
3D method
Operating
temperature
Material
screw
Battery
Battery life
side cover
Note:
• If the usage time is extremely short even after the battery
has been charged fully, the battery may be worn out.
battery
Consult the shop where you purchased the product.
• The specification may change without notice.
Liquid Crystal Shutter
32°F - 104°F (0°C - 40°C)
Frame: Resin
Lens: Liquid crystal glass
Lithium-ion polymer rechargeable
battery AHB341018PI
23 hours
* The battery operating time may
become shorter depending on the usage
condition or environment.