Manual Tuning; Skipping Channels; Skipping Video Inputs - Toshiba 46UL610U Owner's Manual

1
> Settings > SETUP > Auto Tuning >
A confirmation screen appears.
2
Press to start Auto Tuning or
OK
The TV cycles through all the channels and stores all
active channels in memory.
To view the programmed channels, press

Manual Tuning

After storing channels in memory, you can manually
enter channels if the channel number is known.
1
> Settings > SETUP > Manual Tuning >
2
Use buttons 0–9 on the remote control to enter the
channel number (for example, 56). Press
3
Press to start Manual Tuning.
OK
The channels found are listed at the center of the screen.
Type Description
ATV Analog channel.
DTV Digital channel
Chapter 5: Setting up your TV
.
OK

Skipping channels

to abort.
To prevent a channel from being viewed, you can set it
to be skipped.
or CH .
CH
1
2
Press B or b to select Channel Options. Press
The list of channels appears.
.
OK
.
O K
3
Move to the 8 column. Press B or b to select a
channel to skip. Press
clear the selection, press
Note: You cannot tune skipped channels using
Use buttons 0–9 and

Skipping video inputs

You can set video inputs to be skipped when selecting
inputs in the Input selection window.
To turn on skip:
1
Connection >
2
Press B or b to select Input Labeling. Press
3
Press B or b to select the item you want to be
skipped. Press the RED button to turn on Skip.
To turn off skip:
Press again the RED button to turn off Skip.
> Settings > SETUP > TV Settings >
Channel Options
Ch. Type Label
DTV
5-1
6
ATV
6-1 DTV
8 ATV
9
ATV
ATV
10
11 ATV
12 ATV
. The box is selected. To
O K
.
O K
on the remote control.
-
> Settings > PREFERENCES > AV
.
O K
.
O K
.
O K
CH
or .
CH
.
OK
31