Using Your Pc With The Tv; Adjusting The Image; Setting The Pc Audio; Setting The Timer To Turn On The Tv - Toshiba 46UL610U Owner's Manual

Using your PC with the TV

Adjusting the image

If the edges of the picture are hidden, readjust
Horizontal Position and Vertical Position. If the
picture is affected by interference, readjust Clock
Phase and Sampling Clock.
1
Select PC input mode (- "Selecting the video input
to view" on p. 43).
2
> Settings > PREFERENCES > Display
Settings > .
O K
3
Press B or b to select PC Settings. Press
Note: If a PC is not connected or there is no PC input
signal, this menu will not be available.
4
Press B or b to select an item.
5
Press C or c to make adjustments.
Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of
malfunction.
Mode Description
Horizontal Moves the picture left/
Position right.
Vertical Moves the picture up/
Position down.
Helps to reduce noise
Clock Phase
and sharpen the picture.
Helps to reduce noise
Sampling and minimize periodic
Clock vertical stripes on the
screen.
* The default settings and /or adjustment ranges vary
depending on the input signal format.
To reset PC Settings:
Select Reset. Press .
O K

Setting the PC audio

You can output sound from your PC when connecting
it to your TV, using the AUDIO IN terminal and PC
audio cable.
1
> Settings > PREFERENCES > AV
Connection > .
O K
2
Press B or b to select Rear Shared Audio.
3
Press C or c to select PC.
Note: Set Shared PC Input to PC to make the PC item
selectable.
Chapter 6: Basic features

Setting the timer to turn on the TV

You can set the on timer to turn on the TV to a preset
channel or input at a preset time.
To activate the timer:
1
(Another:
2
Press B or b to select Enable On Timer.
3
Press C or c to select On.
Note: If the Enable On Timer is set to Off, other menus
under On Timer cannot be changed.
.
OK
To set the timer:
1
2
Set these options to your preference:
Item
Input
Channel
Volume
Adjustment range
within ±10 from
center.*
Time until
Power On
within ±10 from
center.*
within ±15 from
3
Select Done. Press
center.
Note: If you do not operate the TV for 1 hour after it is
powered on by the On Timer feature, it turns off.
within ±5 from
center.
To cancel the timer:
1
2
Press B or b to select Enable On Timer.
3
Press C or c to select Off.
> Settings > APPLICATIONS > On Timer >
> Timer > On Timer >
> APPLICATIONS > On Timer >
Description
Video input source.
Channel to view.
Volume level.
Desired length of time until the TV
turns on.
minimum= 00:10, maximum= 12:00
Press C or c.
•
Use the number buttons.
•
.
OK
> Settings > APPLICATIONS > On Timer >
.
O K
.)
O K
.
O K
.
O K
51